Product Overview
The SFL-P80 fire alarm sound and light alarm is one of the sound and light alarm products independently developed by Ningbo Jinchun Intelligent Technology Co., Ltd. This product is mainly used in fire alarm control systems. The controller sends command codes to trigger the sound and light actions of the alarm or to reset it. The alarm can transmit the status of external power supply faults and normal conditions to the intelligent controller, allowing the controller to report the status of the external power supply. The address of the sound and light alarm is set by a handheld electronic encoder, with an address range of 000 to 199.
When the fire alarm control system sends a start signal to the fire alarm, the fire alarm can emit a fire alarm sound and light signal, thereby alerting personnel on site. The SFL-P80 sound and light alarm meets the requirements of standard GB 26851-2011.
Technical Characteristics
| Dimensions | 127mm x 143mm x 48mm |
| Weight: | Approximately 180g |
| Operating Temperature: | -10℃ to 55℃ |
| External Power Supply Voltage: | 19VDC to 30VDC |
| External Power Supply Ripple: | Maximum 100mV RMS |
| External Power Supply Current: | Maximum 45mA at 24VDC in alarm state |
| Flash Frequency: | 1.5Hz to 1.8Hz |
| Sound Pressure Level: | 75dB to 115dB |
| Standards: | GB 26851-2011 |
| Software Version: | A |
| Usage Location: | For use in non-residential areas (indoor type) |
| Certification Mark: |  |
Key words:
Point-type photoelectric smoke fire detector
Point-type temperature sensing fire detector
Fire alarm with sound and light
Manual fire alarm button
Fire hydrant button
Module
Standalone photoelectric smoke fire detector
Others
Related Products
Product Consulting
©2024 Ningbo Jinchun Intelligent Technology Co., Ltd.