Product Overview
The L100CP manual fire alarm button is a fire control system device used in conjunction with controllers compatible with Ningbo Jinchun Intelligent Technology Co., Ltd. It is a dedicated addressable manual fire alarm button installed on a two-wire communication circuit. When a fire is detected, the product's operation panel is manually pressed, sending an alarm signal to the monitoring controller, while the LED light on the panel indicates the alarm status.
Technical Characteristics
| Operating Temperature: | -10℃~55℃ (14F～131F) |
| Operating Humidity: | 5%～95% RH relative humidity, no condensation |
| Rated Operating Voltage: | DC24V |
| Average Current: | 280µA @ DC24V (communication every 5 seconds, LED flashing) |
| Maximum Current: | 1.7mA @ DC24V, LED steady on |
| Dimensions: | 86 (length) x 90mm (width) x 37mm (height) |
| Weight: | Approximately 100g |
| Standards: | GB19880-2005 |
| Software Version: | A |
| Certification Mark: |  |
Key words:
Point-type photoelectric smoke fire detector
Point-type temperature sensing fire detector
Fire alarm with sound and light
Manual fire alarm button
Fire hydrant button
Module
Standalone photoelectric smoke fire detector
Others
Related Products
Product Consulting
©2024 Ningbo Jinchun Intelligent Technology Co., Ltd.