Product Overview
The SFL-MD80 module features a single output and a single input channel. Two independent LED indicators can display off, flashing, or steady states based on command codes from the controller.
The input channel monitors a passive normally open contact and feeds its status back to the controller. The output channel outputs a set of normally open contacts and monitors the output wiring and external input power.
The address of this module is written by the address programmer CP900M, with an address setting range of 001—198. The written address is the address N of the output channel, and the address N+1 of the input channel is generated automatically. This module is set to dual address at the factory.
Technical Characteristics
| Operating Temperature Range: | -10℃ to 55℃ |
| Operating Humidity Range: | 5% to 95% R.H. relative humidity, no condensation |
| Voltage Range: | 15 to 32VDC |
| Static Current: | 410HA @24VDC without communication |
| Lighting Current: | 2.3mA |
| Terminal Resistance: | 47K |
| External Power Input Voltage: | Rated 24VDC |
| External Power Input Current: | Maximum 2A |
| Output Contact Capacity: | 2A, 30VDC (resistive load) |
| Dimensions: | 86mm long x 90mm wide x 30mm high (including base, see Figure 2A) |
| Weight: | Approximately 110g |
| Software Version: | A |
| Implementation Standards: | GB16806-2006 |
| Certification Mark: |  |
Key words:
Point-type photoelectric smoke fire detector
Point-type temperature sensing fire detector
Fire alarm with sound and light
Manual fire alarm button
Fire hydrant button
Module
Standalone photoelectric smoke fire detector
Others
Related Products
Product Consulting
©2024 Ningbo Jinchun Intelligent Technology Co., Ltd.