Product Overview
The L100HYD addressable fire hydrant button is a fire control system device used in conjunction with controllers compatible with Ningbo Jinchun Intelligent Technology Co., Ltd. This device is an intelligent addressable fire control system device, installed in indoor fire hydrant boxes for manual activation of fire pumps on-site and displaying the pump's operating status. The device can be integrated into a two-bus alarm control system, can indirectly start the fire pump, and can receive feedback signals from the pump room. When the product's operation panel is manually pressed, the red LED light turns on and remains lit until the start state is reset. When the pump starts and provides a response signal, the green LED light on the product turns on and remains lit until the pump stops working.
Technical Characteristics
| Operating Temperature: | -10°C to 55°C (14°F to 131°F) |
| Operating Humidity: | 5% to 95% RH relative humidity, no condensation |
| Rated Operating Voltage: | DC24V |
| Contact Capacity: | 0.5A / 250VAC |
| Average Current: | 280μA @ DC24V (communicates every 5 seconds, LED blinks) |
| Maximum Current: | 1.7mA @ DC24V, LED continuously lit |
| Dimensions: | 86mm (length) x 90mm (width) x 37mm (height) |
| Product Weight: | Approximately 105g |
| Standards: | GB 16806-2006 |
| Software Version: | A |
Key words:
Point-type photoelectric smoke fire detector
Point-type temperature sensing fire detector
Fire alarm with sound and light
Manual fire alarm button
Fire hydrant button
Module
Standalone photoelectric smoke fire detector
Others
Related Products
Product Consulting
©2024 Ningbo Jinchun Intelligent Technology Co., Ltd.