Product Overview
The L100INT relay module is used for intelligent two-wire systems and can set the module address through the handheld programmer LP100, with an address range of 001 to 199. It allows for connection with controllers and monitoring of traditional two-wire detectors. In this mode, the module can feedback the operating status (normal, open circuit, or alarm) of the monitored detectors to the controller. All monitored two-wire detectors must be compatible with this module. There is an LED indicator controlled by the controller on this module.
Technical Specifications
| Operating Temperature Range: | -10℃~55℃(14F～131F) |
| Operating Humidity Range: | 5%～95%RH relative humidity, non-condensing |
| Rated Operating Voltage: | DC24V |
| Static Current: | 310μA @DC24V without communication |
| Maximum Lighting Current: | 1.6mA @DC24V (LED on) |
| Terminal Resistance: | 4.7KQ |
| Dimensions: | 85mm long x 85mm wide x 36mm high (including base, see Figure 2A) |
| Weight: | Approximately 90g |
| Software Version: | A |
| Implementation Standards: | GB16806-2006 |
Key words:
Point-type photoelectric smoke fire detector
Point-type temperature sensing fire detector
Fire alarm with sound and light
Manual fire alarm button
Fire hydrant button
Module
Standalone photoelectric smoke fire detector
Others
Related Products
Product Consulting
©2024 Ningbo Jinchun Intelligent Technology Co., Ltd.