Product Overview
The L300C module outputs a set of normally open contacts and monitors the output wiring and external power supply. The LED indicators on this module can display off, flashing, or steady states based on command codes from the controller. The relay inside the module is activated or reset by commands from the controller.
The address of this module is written by the address programmer LP100, with an address setting range of 001 to 199.
Technical Characteristics
| Operating Temperature Range: | -10ºC to 55ºC (14ºF to 131ºF) |
| Operating Humidity Range: | 5% to 95% R.H. relative humidity, non-condensing |
| Rated Power Supply Voltage: | DC24V |
| Static Current: | 380µA @ DC24V without communication |
| Lighting Current: | 1.6mA @ DC24V (LED on) |
| Output Contact Capacity: | DC24V/1A, 100ms (resistive load) |
| Dimensions: | 86mm (length) x 80mm (width) x 33mm (height) (including base, see figure) |
| Weight: | Approximately 75g |
| Software Version: | A |
| Implementation Standards: | GB16806-2006 |
Key words:
Point-type photoelectric smoke fire detector
Point-type temperature sensing fire detector
Fire alarm with sound and light
Manual fire alarm button
Fire hydrant button
Module
Standalone photoelectric smoke fire detector
Others
Related Products
Product Consulting
©2024 Ningbo Jinchun Intelligent Technology Co., Ltd.