Address Compiler (LP100)

Product Overview

The LP100 is an electronic coding device that requires an electronic encoder for address setting on-site during construction. The encoder has a built-in central processing unit (CPU) and is powered by an internal battery, featuring a numeric keypad and an LCD display. This device can be used to set addresses for smart detectors and modules. Users input the address to be set via the numeric keypad (displayed on the LCD screen), and after confirmation, the address is written to the detector or module. Additionally, this encoder can also be used to read the addresses of already addressed devices and display them on the LCD screen.

To power on, press and hold the '' key for 3-5 seconds until the LCD displays 'Press * to write address, press # to read address', then release the key, indicating that it is powered on and ready for normal use. To power off, press and hold the '' key for 3-5 seconds until the LCD display turns off, indicating that it is powered off. If not used for 5 minutes, the LP100 will automatically power off.

Technical Specifications