Product Overview
The L400CM input/output module features a single output and a single input channel. Two independent LED indicators can display off, flashing, or steady states based on command codes from the controller.
The input channel monitors a passive normally open contact and feeds its status back to the controller. The output channel outputs a set of normally open contacts and monitors the output wiring and external input power supply.
The address of this module is written by the address programmer LP100, with an address range of 001 to 199. The written address is the address N of the output channel, and the address N+1 of the input channel is generated automatically. This module is set to dual address at the factory.
Technical Specifications
| Operating Temperature Range: | -10°C to 55°C (14°F to 131°F) |
| Operating Humidity Range: | 5% to 95% R.H. relative humidity, non-condensing |
| Bus Voltage: | DC24V |
| Static Current: | 410μA @DC24V (no communication) |
| Indicator Current: | 2.3mA @DC24V (LED on) |
| Terminal Resistance: | 47KQ |
| Power Supply Voltage: | Rated DC24V |
| Power Supply Current: | Maximum 1A |
| Output Contact Capacity: | 1A, DC30V (resistive load) |
| Dimensions: | 86mm long x 86mm wide x 34mm high (including base, see Figure 2A) |
| Weight: | Approximately 104g |
| Software Version: | A |
| Implementation Standards: | GB16806-2006 |
Key words:
Point-type photoelectric smoke fire detector
Point-type temperature sensing fire detector
Fire alarm with sound and light
Manual fire alarm button
Fire hydrant button
Module
Standalone photoelectric smoke fire detector
Others
Related Products
Product Consulting
©2024 Ningbo Jinchun Intelligent Technology Co., Ltd.